Previous articles addressed transmission efficiency through temperature rise, current and slip ratio, and soft-start and overload capability through starting current and torque-limiting protection. This article focuses on a more maintenance-oriented indicator: sealing performance and oil-leakage failure rate. A fluid coupling transmits power through oil; once leakage occurs, transmission capability declines, the site is contaminated and maintenance frequency increases. Sealing performance can be preliminarily assessed through the following three observation points without disassembly.
· After prolonged full-load operation, inspect shaft ends and end covers for oil traces.
The most direct criterion is whether any oil seepage occurs at shaft ends and end covers after prolonged full-load operation. High-quality products use rational sealing structures and high-grade seals; under normal conditions, shaft ends remain dry and end covers clean after months or longer, without frequent oil replenishment. If oil accumulates on shaft ends or oil sludge forms at end-cover edges after a period of operation, the seal has failed or was improperly selected and should be addressed promptly.
· Seepage within one to two months generally indicates an inadequate sealing structure.
If shaft-seal seepage or joint-face leakage occurs within one to two months of commissioning, the sealing structure is likely unreasonable or the seal material substandard. Common causes include insufficient oil and temperature resistance of seals, low machining accuracy of mating surfaces, unreasonable preload design of fastening bolts and poor assembly processes. Such products rarely reveal problems in the short term but fail once continuous operation begins. During selection, focus on sealing structure design, seal brand and material rather than price alone.
· Under harsh operating conditions, seal durability is a core evaluation criterion.
In dusty, high-humidity environments such as coal mines and aggregate yards, dust accelerates seal-lip wear and moisture attacks seals and mating surfaces; seal durability directly determines service life. Conventional seals may age and fail within months, whereas products with high-standard sealing structures can significantly extend maintenance-free intervals. For such applications, seal durability should be a core selection criterion, prioritizing suppliers with harsh-condition application cases and seal-life data.
Summary:
Evaluate sealing performance and leakage failure rate through three observation points: whether shaft ends and end covers remain dry after prolonged full-load operation, whether seepage occurs within one to two months of commissioning, and whether seal durability meets requirements under harsh conditions. Although sealing is a component-level indicator, it directly affects transmission reliability and O&M costs. During procurement, clarify sealing structure, seal material and applicable operating conditions—more cost-effective than repeated oil replenishment and frequent downtime.