Hydrodynamic Transmission · Direct Manufacturer

Guangdong Zhongxing
China Established Fluid Coupling Manufacturer

Founded in 1958, we began developing fluid couplings in 1984, entered a joint venture with VOITH (Germany) in 1994 and completed restructuring in 2001. With over six decades of technical expertise and advanced international manufacturing management, we are an ISO 9001 certified National Key High-Tech Enterprise.

ISO 9001 Quality Management System National Torch Program Key High-Tech Enterprise Four certified management systems Guangdong Hydrodynamic Transmission Engineering Research Center
Main gate of GUANGDONG ZHONGXING POWER TRANSMISSION CO., LTD.
1958Founded in 1958; joint venture with VOITH (Germany) in 1994
300,000 unitsFluid couplings delivered
100,000+ m²In-house production from casting to final assembly
1,300 customersLong-term customers
01 / Product Range

Two ranges — from soft start to stepless speed control

Constant-filling couplings absorb start-up shock and provide overload protection; variable-speed couplings handle flow and speed regulation in service. Choosing the wrong type is the most common mistake on site — check the operating conditions first, then the model.

Not sure which type? Tell us your conditions →
How it works

Inside one coupling,
how the drive is made soft

The motor turns the pump wheel, which converts mechanical energy into oil kinetic energy; the oil drives the turbine wheel, converting it back into mechanical energy. There is no mechanical contact between the two wheels — that is the whole secret behind shock absorption and torque limiting.

  • Pump wheelConnected to the input shaft — the energy pump
  • Turbine wheelConnected to the output shaft — recovering kinetic energy from the oil
  • Working chamberFilling ratio determines transmitted power and torque limiting
  • Fusible plugMelts to release oil at excess temperature, protecting the unit
Internal structure of a fluid coupling: pump wheel and turbine wheel
02 / Model Matrix

23 constant-filling types, matched to your duty

On the same machine, a brake wheel, a pulley or an extended delay chamber for delayed starting perform very differently.

Explore YOX Range →
03 / Why Hydrodynamic Drive

Turn hard starting into soft starting

01

Starting current reduced

The motor can start under load, with start-up extended to over ten seconds and starting current greatly reduced. A smaller motor can drive high-inertia loads, avoiding oversizing.

02

Automatic overload protection

On stall, oil slip increases and transmitted torque stays within the catalog overload coefficient (starting 1.5–1.8 for YOX360 and above), protecting motor and gearbox.

03

Shock and vibration absorbed

Hydrodynamic transmission removes the rigid mechanical link: the oil film flattens torque peaks during starting, reversing and sudden loading, extending bearing and gear life.

04

Automatic multi-drive balancing

On dual/triple-drive conveyors and large mills, slip automatically balances motor power without complex electronic synchronisation.

05

No mechanical wear

No contact surfaces between the pump and turbine wheels, no wearing parts in normal service. Routine checks of oil level and seals are all that is needed — maintenance costs are minimal.

06

Reliable in harsh environments

In mining and metallurgical sites with dust, humidity, temperature extremes and frequent starts, simpler means more reliable — an inherent advantage of fluid couplings.

04 / Manufacturing Capability

From casting to dynamic balancing, all in-house

Eight out of ten quality differences between couplings come from castings and dynamic balancing. We keep both processes in-house.

Fluid coupling assembly workshop
Assembly workshop · 100,000 m² production base
Casting workshop
Casting
CNC machining workshop
CNC machining
Dynamic balancing test
Dynamic balancing
Heat treatment · quenching
Heat treatment
Assembly workshop
Assembly & final inspection
Finished goods area
Finished goods area · units ready for shipment
Certifications & Honors

NationalKey High-Tech Enterprise, four certified management systems

Quality, environmental, occupational health & safety and metrology management systems are all third-party certified; our R&D platform is recognised by Guangdong Province and core technology holds national invention patents. Original certificates are shown below.

  • High-Tech Enterprise Certificate, issued 19 November 2024, valid for three years
    High-Tech Enterprise Certificate2024 · Jointly issued by the Department of Science and Technology of Guangdong Province and two other authorities
  • Quality Management System Certificate, GB/T 19001-2016 / ISO 9001:2015
    Quality Management System CertificationGB/T 19001-2016 / ISO 9001:2015
  • Environmental Management System Certificate, GB/T 24001-2016 / ISO 14001:2015
    Environmental Management System CertificationGB/T 24001-2016 / ISO 14001:2015
  • Occupational Health & Safety Management System Certificate, GB/T 45001-2020 / ISO 45001:2018
    Occupational Health & Safety Management System CertificationGB/T 45001-2020 / ISO 45001:2018
  • Metrology System Certificate, assessed under the Guangdong Enterprise Metrology Assurance System certification method
    Metrology System CertificateAssessed under the Guangdong Enterprise Metrology Assurance System certification method
  • Invention Patent Certificate: Double-Chamber Fluid Coupling Runaway Protection Device, Patent No. ZL 2011 1 0353589.X
    Invention Patent · Double-Chamber Fluid Coupling Runaway Protection DevicePatent No. ZL 2011 1 0353589.X
  • Guangdong Hydrodynamic Transmission Engineering R&D Center, named Guangdong Excellent Engineering Technology R&D Center for 2007–2009
    Guangdong Excellent Engineering Technology R&D CenterGuangdong Hydrodynamic Transmission Engineering R&D Center
  • National Torch Program Key High-Tech Enterprise plaque, issued by the Torch High-Tech Industry Development Center, MOST
    National Torch Program Key High-Tech EnterpriseTorch High-Tech Industry Development Center, MOST
05 / Applications

Duties we engineer every day

Send conditions, we recommend a model →
06 / FAQ

Before you select,
ask these questions

Any other questions? Call our technical hotline — an engineer will answer.

Send conditions →
Constant filling or variable speed — which one?
Ask whether speed must change during operation. If the machine only needs gentle starting and overload protection at a constant speed, choose the constant filling YOX — lower cost and maintenance-free. If the process requires adjusting flow or speed while running (fans, pumps, feeders), choose the variable speed YOT: a scoop tube or valve changes the filling for stepless control, with a range of 1-1/5 for centrifugal machines and 1-1/3 for constant-torque machines.
What filling ratio is right? Oil versus water?
Normally calibrated at 80%, with the filling chosen for start-up time and torque limiting: reduce filling for a slower start and lower limiting torque. Both mineral oil and water are usable with identical axial length and fully interchangeable parts; water needs anti-corrosion measures and gives a slightly different transmitted power.
Why is my coupling leaking oil?
Nine times out of ten the leak is at the shaft seal or the fusible plug. Aged seals, excessive shaft-end runout or prolonged high oil temperature cause seepage; a melted fusible plug indicates severe overload or poor cooling. Check oil temperature and alignment before replacing parts, or it will leak again.
What if start-up is too long or too short?
Start-up time depends on filling volume and delay chamber capacity. Too fast — reduce filling or choose a YOXV with a delay chamber; too slow, or the motor stalls — increase filling or recheck motor/load power matching. Do not find the setting by repeatedly adding oil; it can burn out the motor.
Can it replace a torque converter or a VFD?
Different roles. A coupling transmits torque without transforming it — suited to high power, harsh environments, vibration isolation and overload protection, with better cost and reliability than a VFD. A torque converter transforms torque for vehicles and heavy-load launches. For fan and pump speed control, couplings and VFDs each have advantages depending on duty and budget.
Selection & Quotation

Send us your conditions,
selection proposal within 24 hours

Just provide motor power, speed, equipment type and starting requirements. We supply selection calculations, outline and connection dimension drawings, and build to your drawings.

Direct to engineers, no sales hand-off Catalogs and drawings available for download

Used only for this selection enquiry; no marketing messages

Call us Request a Quote